Australian AS 4687:2007 Standard temporary fence China
It is consist of welded mesh panel,round tube frame(square tube frame),plastic feet and top connection. This kind of fence has a superior structure, the globality,mobility and environmental suitability is very good .The fence is easy transport , dismantle easily ,low cost . It has the advantage of one cost, many times used.
Material: hot dip galvanized tube and wire
Zinc coating: 200g/m2 on wire,300g/m2 on pipes
Hot Dipped Galvanized : Australian Standard-42 Microns.
Accessories of temporary fence
The clamp of Temporary Fence
---High quality Temporary Fence Clamps.
---Hot Dipped Galvanized TO Australian Standard-42 Microns.
---Specially moulded and 4 mm thick for additional strength.
Cemented plastic fence feet
---Standard specification:580mm long,245mm wide,130mm high
---Thickness of the block:2.5mm
---Hole diameter:25mm,32mm,42mm & 48mm
Our plastic fence feet offer the following benefits over standard concrete fence feet:
---Made of plastic which is made from polypropylene.
---UV5 for sun/weather protection.
---A piece of high quality steel bar for reinforcement.
---Post holes can run across or go up and down the blocks.
---Designed to be filled with concrete.
Specification of Temporary Fence
|Panel Size:||2400mm(L) x 2100mm(H)|
|Frame: ||32mm O.D. |
|Infill Mesh:||4mm horizontal, 4mm vertical|
150mm x 60mm spacings
|Finish:||Hot Dipped Galvanized to Australian Standard - 42 Microns |
Recommended Specification of temporary fence
|Specification ||Spotted by 3-5mm diameter quality mild steel wire|
|Opening (mm)||75x75 75x100 60x150 50x50 60x60 etc|
|LxW (mm)||2100x2400 1800x2400 2100x2900 2100x3300 etc|
|Finish: ||Hot Dipped Galvanized to Australian Standard - 42 Microns |